Seven Good Reasons Why You Should Choose A Euroflex Sprung Slatted Bed

1. Health Benefits

Every sprung slated bed base specifically designed to conform to the body's natural contours allowing you to lie correctly whilst providing the right amount of support to keep the spine straight. This enables the spine's discs to remain in their natural positions thus relieving tension and possible damage.

2. Increased Comfort

The Right degree of firmness is the key to comfort. Many designs allow the amount of firmness to be altered to suit the individual's requirements. In addition some designs actually allow each partner to vary the degree of firmness on his or her side. In this way both can enjoy a good night's rest on a base specifically adjusted to their needs.

3. Improved Ventilation

A slatted base allows air to pass freely beneath the mattress thus avoiding any build up of perspiration which occurs with an enclosed base and eventually leads to its degeneration.

4. No Accumulations of Dust

Dust will not build up on a well ventilated open-sprung slat system making it an ideal choice for asthmatics and others who may be affected by accumulated dust which is trapped in an enclosed sprung base.

5. Increased Storage Area

An open-sided, slatted base provides simple and easily accessible storage space under the bed. Additionally , an enclosed diven can be fitted with storage drawers under the slats without adding to the height of the bed.

6. Appearance

Curved, lacquered sprung slats make an attractive base which is easy to clean.

7. Natural Material

Slats are produced from Beechwood from professionally managed sustained European forests. This is more 'user friendly' than metal springs or mesh making a slatted base a 'greener' choice.

---

Euroflex Bed Components

SLATS

Laminated German Beech - topside foil coated, underside resin coated - rounded edges.

STANDARD - 53MM WIDE:

1/SL.1050

1050MM KING/SINGLE SLAT

60 CARTON

CORRUGATED - 53MM WIDE:

1/COR.730	730MM QUEEN CORRUGATED SLAT	136 CARTON
1/COR.745	745MM SPEC. LENGTH CORRUGATED SLAT	136 CARTON
1/COR.755	755MM SPEC. LENGTH CORRUGATED SLAT	136 CARTON
1/COR.805	805MM KING CORRUGATED SLAT	102 CARTON
1/COR.820	820MM KING SPECIAL CORRUGATED SLAT	102 CARTON
1/COR.880	880MM SINGLE CORRUGATED SLAT	102 CARTON

CORRUGATED 38MM WIDE:

1/COR.38*900

900*38MM CORRUGATED SLAT

136 CARTON

TENSIONER:

1/TEN.650.7	QUEEN TENSIONER SLAT	160 CARTON
1/TEN.900	KING/SINGLE TENSIONER SLAT	120 CARTON

---

BED COMPONENTS

FIXING CAPS (SHOES)

TWO PIN SLAT CAP:

CODE: 2/STD
MATERIAL: PLASTIC
PACKING: 1200 PIECES

SINGLE PIN 10MM SLAT CAP (BLACK)

CODE:2/SINN
MATERIAL: PLASTIC
PACKING: 1000 PIECES

DELUXE SINGLE PIN SLAT CAP

CODE:2/DEL
MATERIAL:RUBBER
PACKING:1000 PIECES

TWIN 38MM PIVOTING SLAT CAP

CODE:2/TW.PIV
MATERIAL:RUBBER
PACKING:200 PIECES

Pivoting Slat Cap:

CODE 2/PIV
MATERIAL:RUBBER
PACKING:500 PIECES

Single Pin 10mm Slat Cap (black):

CODE: 2/PIN
MEASUREMENTS: A 12mm dia x 26mm long B 20mm dia x 3mm thick C 10mm dia x 19.5 long
PACKING:1000 PIECES

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

---

Tensioners

CODE:	2/TEN
MATERIAL:	plastic
PACKING:	750 pieces
SIZES:	53mm or 38mm

Optimum sleeping comfort using individual weight matching firmness degree setting possibilities

Hard Setting

Soft Setting

---

Metalware

Deluxe Assembly Bracket

Code:3/DAB
(uses a 6mm key)

JCB Bolt

Code: 3/JCB.100B
Description: M6*100mm Brass Plated JCB Bolt (uses 4mm Allen Key)

Cross Dowel

Code: 3/CD
Description: 6*20mm Cross Dowel

---

THREADED RODS AND HEADS

COMBIFEX BRASS HEAD

CODE:	3/CFB
DESCRIPTION:	Combifix Brass Head M6 (uses 5mm Allen Key)

THREADED RODS

CODE:	3/R140
DESCRIPTION:	M6*140MM Threaded Rod

ALLEN KEYS

CODE:	3/AK.4, 3/AK.5 OR 3/AK.6
DESCRIPTION:	4, 5 OR 6MM Allen Key

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

---

Special rod length 75mm available on request

23 or 13mm crews in bushing also available

---

Support Brackets

Centre Rail Support (Code: 3/CR)

FINISH: Galvanised
PACKING: 20 sets (1 set per bed)

---

FLEXIBLE SLAT BEDS

SLAT CAPS:

• Two pin is the cheapest cap to use with inner spring mattress
• Single pin deluxe makes the bed slightly softer
• Pivoting shoe is the best - makes the bed softer

We recommend seventeen slats are used per side

Tensioner Slats: recommended with all beds. These are used on slat number 5 - 9 counting from the top (5 x per side).

FLEXIBLE SLATS:

Types:

• Corrugated perceived in market to be the best
• Standard slats cheaper

Lengths:

Length depends on if slats go inside the outside rail or on top. Slats are made on a radius and can be cut shorter.

METALWARE:

If the customer does not wish for bolt heads to be seen, use either Deluxe Assembly Bracket or Economy Assembly Bracket.

Queen - King	Centre Rail Support Bracket	1 x set
All beds	Deluxe Assembly Bracket	Qty 4
	6mm Allen Key	Qty 1
Or	Economy Assembly Bracket	Qty 4
	Spanner for EAB	Qty 1
Or	M6*100mm brass plated JCB bolt	Qty 4
	6 x 20mm Cross Dowel	Qty 4
	4mm Allen Key	Qty 4
Or	M6*104mm Threaded Rod	Qty 4
	6 x 20mm Cross Dowel	Qty 4
	Combifix brass head M6	Qty 4
	5mm Allen Key	Qty 1

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

---

TYPICAL SIZES

QUEEN (1500 WIDE)

Plain/Corrugated:

730mm Slat	34
or 745mm Slats	34
or 755mm Corrugated Slats	34
650mm Tensioner Slats	10
Slat Caps	68
Tensioner Slides	20

KING (1650 WIDE)

805mm plain or corrugated slats	34
or 820mm corrugated slats	34
900mm Tensioner Slats (customer cuts to length)	10
Slat Caps	68
Tensioner Slides	20

SINGLE

880mm corrugated slats	17
900mm tensioner slats (customer cuts	5
to length)
Tensioner Slides	10
Slat Caps	34

KING/SINGLE

980mm corrugated slats	17
or 1050mm plain slats (customer cuts to length)	17
900mm Tensioner slats	5
Slat Caps	34
Tensioner Slides	10

Note:

Length of slat depends if slats go inside the outside rail or on top. Slats are made on a radius and can be cut shorter